For info:
2004 DMG DMU-70 Evolution 5-Axis VMC Control: Heidenhain Mill-Plus iT Control X-Axis.............................. 29.52" Y-Axis.............................. 23.62" Z-Axis.............................. 20.5" Main drive (100 / 40% DC)........... 46.9 HP / 33.5 HP Rapid traverse: X-Axis.............................. 1968 IPM Y-Axis............................. 1968 IPM Z-Axis.............................. 1968 IPM Max Feed Rate (X,Y, Z-Axis)......... 787 IPM Fixed table......................... 39.4" x 24.41" Swivel rotary table................. 27.56" x 19.68" Max. Table Load..................... 770 lbs. Swivel Range B-Axis................. 0 /+180 Degrees Swivel Range C-Axis................. 360 Degrees Tool Capacity....................... 60 Tools (2 x 30 Tools) Chip-to-chip-time (approx.)......... 7 seconds Maximum Tool Diameter............... 3.14" / 4.13”-5.12" Maximum Tool Length................. 12.4" Maximum Tool Weight................. 13.23 lbs (148.4 lbs / Chain) Spindle Taper....................... Cat 40 Speed Range RPM..................... 18,000 RPM Spindle Torque...................... 60.48 ft/ lbs Machine Weight (approx)............. 17,640 lbs D x W x H (approx).................. 16.7’ x 19’ x 9.8’ Equipped With: Coolant Thru Spindle Renishaw Part Probe Blum Laser Tool Measurement Scales Feedback System Remote Jog Pendant Running One Shift of Less on Aluminum Power On Time: 7,953 Hours Spindle On Time: 2,190 Hours