4" Cincinnati Gilbert Table Type Horizontal Boring Mill

4" Cincinnati Gilbert Table Type Horizontal Boring Mill 

SPINDLE DIAMETER...................... 4"
CONTINIOUS FEED TO SPINDLE............ 29"
TAPER HOLE IN SPINDLE................. #50
VERTICAL TRAVEL....................... 48"
CROSS TRAVEL.......................... 60"
SADDLE TRAVEL......................... 70"
 
WORKING SURFACE OF TABLE.............. 48" X 72"
NUMBER OF T-SLOTS..................... 7
SIZE OF T-SLOT........................ 1 1/16"
 
SADDLE WIDTH.......................... 36"
SADDLE TRAVEL ON BED - MAXIMUM........ 70"
                     - MINIMUM........  1"
 SPINDLE SPEED 
 (INFINATLY VARIABLE, 3 GEAR RANGES).. 7 - 1510 RPM
 ALL SPINDLE & AXIS FEEDS 
 (INFINATLY VARIABLE)................. .5 - 100 IPM
 RAPID TRAVERSE RATE................... 200 IPM
 MAIN DRIVE MOTOR...................... 20 HP 
AC ELECTRICS........................... 230/3/60
 
FEATURES & EQUIPMENT:
 
3-AXIS SONY DIGITAL READOUTS
PROGRAMABLE ENCODED RIDGID TAPPING
3-AXIS BALL SCREWS
AUTOMATIC LUBRICATION OF ALL WAYS
CENTRALIZED LUBRICATION
HARDENED AND GROUND REPLACEABLE WAYS ON BOTH BED AND SADDLE  WAY COVERS FOR SADDLE WAYS ATTACHED TO TABLE  WAY COVERS FOR FRONT OF MACHINE BED COVERING CENTER  FULL PENDANT CONTROL ON & PENDANT BOOM  POWER DRAWBAR AND TOOL EJECTOR  FULL FLOOD COOLANT SYSTEM - PENDANT CONTROLLED WITH PUMP PIPING &  RETURN TROUGHS

4" Cincinnati Gilbert Table 4CDT Type Horizontal Boring Mill