Wasino G-6 Horizontal Turning Center (1999), Swing 15.75", Turn length 2.4"-5.56", Bar capacity 1.5", 6,000 RPM, 5.5 HP, Gang tooling, Fanuc 21i-T, S.Robo-1, Stocker Table

DIRECTION Horizontal 
TURNING DIAMETERS................NOMINAL:2.375 ".......MAXIMUM:4.000 " 
TURNING LENGTHS..................NOMINAL:2.400 ".......MAXIMUM:5.560 "  
MAXIMUM SWING..........................................15.750 " 
CHUCK DIAMETER...................STANDARD:4.000 " .....MAXIMUM:5.000 " 
COLLET TYPE/CAPACITY...................................5C  
BAR CAPACITY.....................STANDARD:1.500 "......MAXIMUM:1.500 " 

HEADSTOCK - SPINDLE 1 
NOSE...................................................Flat
BORE: 1.812 "  
SPEED..................................................6000 RPM Optional 8000 RPM 
DRIVE MOTOR............................................5.5 HP  

TOOLING / WEIGHTS / MEASURES TOOLING PRIMARY 
TYPE...................................................SLIDE  
MAX. NUMBER OF TOOLS...................................8  
TOOL SHANK SIZE (inches) 
SQUARE.................................................0.625 " 
ROUND..................................................0.750 " 

MAX. NUMBER OF SIMULTANEOUS CUTTING TOOLS..............1 
MACHINE NET WEIGHT.....................................3640 lbs. 

FLOOR LAYOUT: 
LENGTH.................................................55 " 
WIDTH..................................................61 " 
HEIGHT.................................................66 "
 
AXIS SPECIFICATIONS 
Std. No. Axes: 2 AXIS TRAVEL TRAVERSE RATE FEED RATE 
X-axis..............................11.8" Traverse...470 IPM Feed...354 IPM 
Z-axis..............................11.2" Traverse...787 IPM Feed...354 IPM 

Equipped with:
Fanuc 21i-T
200-220v  7kva
Weight 3,700#
S.Robo-1
Stocker Table
Under power
Available immediately