For info:
USED HYD-MECH FULLY AUTOMATIC MITERING PRODUCTION BANDSAW MODEL S-25-A (1996) Stock No. 7732 Specifications: Capacity: round rectangular At 45 angle: 18" diameter 18" high x 27" wide 18" diameter (round) At 30 angle: 12" diameter (round) Blade: 18' 10" x 1-1/2" x .050" Blade speed: 75 - 400 spm (infinitely variable) Blade tension: Blade guides: hydraulic carbide (coolant lubricated) Blade wheel diameter: 22" Motors: blade drive hydraulic drive 10 HP 3 HP Voltage: 240 volt, 3 ph Pumps Hydraulic pump: pressure compensated Constant pressure: 6-1/2 gpm variable flow (maximum) Coolant pump: 3-1/2 gpm (150w) Hydraulic tank: 20 gallon Vise Control: hydraulic (remote switch) Shuttle stroke: 0-40" single stroke multi-shuttle capability of up to 99 strokes Table height: 36' Machine weight: 7,300 lbs. Maximum work load: 8,000 lbs. Overall dimensions: 111" wide, 160" long, 72" high Features: -A unique swing head design. The head swings through an arc from 90 degree to 30 degree (60 degree of swing). The angle is set remotely at the console. -Carbide guides provide long life, consistent accuracy and reduced vibration. -A hydraulic servo control allows the machine to react to the section of material being cut, as well as allowing the operator to adjust both feed force and feed rate independently. -A powered blade brush cleans blade gullets. -Heavy duty motor, reducer and variable drive assembly allows the operator to infinitely adjust blade speed from 75 - 400 sfm. -Hydraulic blade tension ensures constant and accurate blade tension. -The shuttle stroke is adjustable from 0 - 40" by use of an adjustable stop. A micrometer head is used for fine adjustment. An accuracy of .005" per shuttle is assured. -The three vise shuttle system incorporated a "floating" shuttle vise which ensures accurate indexes when working with warped stock. The vises are long stroke and controlled at the console.